SHARE
This tutorial learn how to fix bootloop Cherry Mobile Flare S5.
Also the purpose of this is to revive your voided warranty and revert back to original OS, Partition,
Recovery, Logo and etc.
This fulldump stockrom also have Dolby good for sound management.

In this instruction you need PC , Desktop or Laptop and working USB cable. Also this method works  Windows OS 7, 8, 8.1 and 10 only.

 

Requirements:
 Download all:
First thing to do:
  • Backup your phone. YOU WILL LOSE ALL YOUR DATA INCLUDING CONTACTS, MESSAGES, PHONE CALLS, APPS, ETC.
  • Self Confident
Procedure:
 Instructions
1. Download all necessary files and Enable USB Debugging mode in your phone..
2. Install Drivers USB_VCOM_Driver.rar
In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.
Driver installation Screenshot 1
Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.
Mediatek Preloader Screenshot
3.  Now Click on Next and select Install this driver software anyway and wait for finishing the process.
Install Driver Screenshot
4.  After installation is finished then Restart your computer, That’s it.
5. Open flash_tool.exe, click on the Download Tab
Extract the downloaded Flare S 5 stock rom to the new folder you created.

Flash Tool Screenshot

 

6. Click Scatter-loading and browse for the scatter file (MT6753_Android_scatter)
7. For Bootloop only
Make sure flashing mode is set to “Download Only” and check mark all except Preloader.
Note: If deadboot/hardbrick set “Download+Format” and check Preloader.
8. Click Download.

Download SPFT Screenshot

 

9. Turn off your phone, connect your phone to the PC and wait for the flashing to commence.

10. Green Circle image with check will show once flashing is completed. That’s it!

Success Flashing Stockrom Cherry Mobile Flare S5 Stockrom Screenshot
11. Disconnect your phone in USB cord then open if still bootloop then try to factory reset in recovery settings. To go in recovery mode reboot your phone hold and press power on and volume up simultaneously until recovery mode appeared.
Credits:
Glenn Cañete Sandig  for Stock Rom

4 COMMENTS

  1. Got an error,

    —————————
    Smart Phone Flash Tool
    —————————
    BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)

    [EMI] Obtain DRAM Failed!
    [HINT]:
    Please check your load matches to your target which is to be downloaded.
    —————————
    &OK &Help
    —————————

    Problem is I was not able to make a backup of my working ROM (Default with old youtube virus – auto install apps).

    Now, my phone seems hard bricked… no recovery, no fastboot, no reaction when connected to laptop… although the laptop recognizes it when attached… but no light indicator on the phone or something.

    I downloaded also (Flare-S5-V09-Stock-Rom-Fixed.zip) but I do not know how to use it since I could not go to recovery mode.

    What would I do? is there still hope for my phone?

    Thanks in Advance

LEAVE A REPLY

Please enter your comment!
Please enter your name here