SHARE

How to fix bootloop for Myphone My32L

This tutorial teach you how to fix bootloop or deadboot Myphone My32L. This firmware or stockrom of My32L need to flash via SPFT using your working USB cable and PC. Just follow our instructions carefully.
How to fix bootloop for Myphone My32L

 



Requirements:
STOCKROM
PC/LAPTOP(WINDOWS OS)
USB CABLE
PHONE

 

 

 

FOR WINDOWS XP/7 -INSTALLING DRIVERS

1. Download Mediatek Driver and Extract then Install the driver for 32 or 64 bit operating system of windows 7.

Driver Choose 32 or 64 bit

2.  Before you plug your phone in PC, you need to focus in Device Manager, then plug your phone without the battery you only have approximately 5 seconds to appear MT65xx device that shows under Other devices, you need to right click it as soon as you see it.

MTK USB PORT
Then after you rightclick, click to Update driver software
3. Then choose – Browse my computer for driver software
Browse Driver
Browse the Mediatek MT65xx Preloader Driver folder
Make sure you know the version of OS to choose the right driver for your PC.
Choose your OS version, then choose if 32-bit or 64-bit for your PC.
E.G. s Win7  folder:
usb2ser_Win7.inf – if 32-bit
usb2ser_Win764.inf – if 64-bit
4. Another options, to find right driver for your phone is to open your internet while your phone is connected without the battery and automatically searching driver for your phone.
FOR WINDOWS 8/8.1/10 -INSTALLING DRIVERS
1. Download all necessary files and Enable USB Debugging mode in your phone..
2. Install Drivers USB_VCOM_Driver.rar
In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.
add legacy
Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.
mediatek preloader
3.  Now Click on Next and select Install this driver software anyway and wait for finishing the process.
Install driver anyway
4.  After installation is finished then Restart your computer, That’s it.
If still not success in installing driver just Disabled Driver Signature Verification
1. Go to PC Settings>General>Troubleshoot>Advanced Options>Startup Settings>Disabled Driver Signature Enforcement>Then Restart
disabled driver signature verification
Once you disabled. Then follow the procedure above to install the driver. Once success proceed to next step.

5. Download SP_Flash_Tool_v5.1352.01.rar and extract then click flash_ tool to open

Click Flash tool
6. Click Scatter_loading and open your scatter file like image below(I’m using mt6572 scatter File)
Click Scatter Loading

7. Check all except preloader. (If your device is hardbrick/deadboot apply check in preloader)

Uncheck Preloader

8. Click download

Click Download

9. Wait until green circle appear

SPFT SUCCESS GREEN CIRCLE

Remove your phone to usb cable then insert your battery and On your android phone..Enjoy!

Note: If not reboot try factory reset in recovery mode of your phone.


(adsbygoogle = window.adsbygoogle || []).push({});

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.