Tutorial how to flash TWRP For Lenovo A5000 in Lollipop version

USB Cable
Download Links:
Mediatek VCOM Drivers:
SP Flash Tool:
Lenovo TWRP + Scatter file
Click Here


1. Download all necessary files and Enable USB Debugging mode in your phone..
2. Install Drivers USB_VCOM_Driver.rar

In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.

Tutorial to flash

Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.
tutorial how to flash
 Now Click on Next and select Install this driver software anyway and wait for finishing the process.
Tutorial to flash
    After installation is finished then Restart your computer, That’s it.
3. Extract SPFlash tool

4. Extract

5. Open flash_tool.exe, click on the Download Tab

Tutorial to flash


6. Click Scatter-loading and browse for the scatter file(included in (MT6582_Android_scatter)
7. Make sure flashing mode is set to “Download Only” and check mark only on the Recovery.

Tutorial to flash



8. Click Download.
9. Turn off your phone, connect your phone to the PC and wait for the flashing to commence.
10. Green Circle image will show once flashing is completed.
11. Important: Disconnect your phone from the computer, press and hold Vol Up + Power.
12. Boot menu will show, select Recovery.
That’s it!Credits:
Lenovo a5000 group



Please enter your comment!
Please enter your name here