SHARE

How to root Cherry Mobile Cubix Cube 2 and Flash TWRP Recovery

Cubix_Cube2 Root and TWRP
 
 
CHERRY MOBILE CUBIX CUBE 2 COMPLETE SPECS:
Dimensions: 79 x 156 x 8 mm
Weight: 165 g
SoC: MediaTek MT6592
CPU: ARM Cortex-A7, 1700 MHz, Cores: 8
GPU: ARM Mali-450 MP4, 700 MHz, Cores: 4
RAM: 2 GB
Storage: 16 GB
Display: 5.7 in, IPS, 1080 x 1920 pixels, 24 bit
Battery: 3500 mAh, Li-Polymer (BUILT-IN)
OS: Android 4.4 KitKat
Camera: 13 MP with BSI and Panasonic Sensor (4864 x 2736 pixels), 8MP with Sony Sensor (1920 x 1080 pixels), 30 fps
SIM card: Micro-SIM
Support 3G network: GSM 900/1800MHz WCDMA 900/2100MHz
Wi-Fi: b, g, n, Wi-Fi Hotspot
USB: 2.0, Micro USB
Bluetooth: 4.0
Positioning: GPS, A-GPS
Standby: 2-3 Days
With Wireless Charging sensor.
Warning: Rooting can void your warranty! Do it at your own risk!
 
Requirements:
CM CUBIX CUBE2
internet/data/wifi
Kingroot4.1.zip (download and extract) 

Procedure:

 

  1. First of all download full APK file of kingroot.
  2. If you use your computer to download the file, then you need to transfer in your device.now open the APK file with your phone file manager.
  3. before installing this app first ensure that you have allowed third party installations in your device you can check this option by your device setting.
  4. Go To Setting > Security > and there you can tick the “Unknown sources” box.
  5. After successful installation, start the application and wait for Kingroot to fully analyze your device. after a few seconds you will see the main window,
  6. Click the Big Green Circle on your device that says Root and wait for a few minutes make sure you have a good internet connection.
  7. After a few minutes, you should see a tick mark in a green circle and the blue horizontal bar below the green circle, which means that your device has been successfully rooted.
Kingroot Success

 

 

Now download rootchecker in playstore to verified! 

Flash TWRP/PHILZ Recovery
 
Requirements:
Rooted
twrp_cubix2.img (Philz Touch)  rename to recovery.img
PHILZ-recovery_.img (Philz Touch) rename to recovery.img
Procedure:
Step 1:Install rashr_tool.apkStep 2: Move the recovery.img in your internal memory outside the folder which you can see easily.
Since Cubix cube 2 has no sdcard.

Step 3: Open Rashr Tools Grant SuperSu
Click Recovery from Storage
Then choose Recovery.img Click OK


To boot into recovery mode manually, press volume up + volume down + power button


That’s it! You can backup and install your desired custom rom now! ..

Credits:
Kingroot
Cubix Cube 2 group

10 COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here