SHARE
How to fix bootloop in Alcatel Flash 2 included Stock Rom flash via SPFT

This tutorial is able to help you oh how to fix bootloop and hardbrick in Alcatel Flash 2.
In case you don’t have backup and installed custom recovery you can proceed in this procedure.
How to fix bootloop Alcetel Flash 2
 
 
 
Requirements:
PC
USB Cable
Download Links:
Mediatek VCOM Drivers

AFP2 Stock rom(v2.9 lollipop)


(adsbygoogle = window.adsbygoogle || []).push({});


 Instructions
1. Download all necessary files and Enable USB Debugging mode in your phone..
2. Install Drivers USB_VCOM_Driver.rar
In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.
How to fix bootloop in Alcatel Flash 2 Screenshot 2
Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.
How to fix bootloop in Alcatel Flash 2 Screenshot 3
3.  Now Click on Next and select Install this driver software anyway and wait for finishing the process.
How to fix bootloop in Alcatel Flash 2 Screenshot 4
4.  After installation is finished then Restart your computer, That’s it.
5. Open flash_tool.exe, click on the Download Tab
Extract the downloaded AFP2 stock rom to the new folder you created.

How to fix bootloop in Alcatel Flash 2 Screenshot 5

 

6. Click Scatter-loading and browse for the scatter file (MT6753_Android_scatter)
7. For Bootloop only
Make sure flashing mode is set to “Download Only” and check mark all except Preloader.
Note: If deadboot/hardbrick set “Download+Format” and check Preloader.
8. Click Download.

How to fix bootloop in Alcatel Flash 2 Screenshot 6

 

9. Turn off your phone, connect your phone to the PC and wait for the flashing to commence.
10. Green Circle image with check will show once flashing is completed. That’s it!

How to fix bootloop in Alcatel Flash 2 Screenshot 7
11. Disconnect your phone in USB cord then open if still bootloop then try to factory reset in recovery settings. To go in recovery mode reboot your phone hold and press power on and volume up simultaneously until recovery mode appeared.

Credits:
Long nt for rom
AFP2 Group

RELATED ARTICLESMORE FROM AUTHOR

71 COMMENTS

  4. Hi,just for your info,that day when i update via ota,its done updating but when turn on phone,its just stuck at flash 2 logo,so i tried to recover using your hardbrick method:choose download+format and tick preloader,and i lost my imei,luckily i manage to recover it back,thanks for your posting anyway!

  5. Hi,just for your info,that day when i update via ota,its done updating but when turn on my phone stuck at flash 2 logo forever,stock recovery clear cache,adb,fastboot erase cache etc doesnt work,so i came to your blog and found your post,i tried your download+format;tick preloader option and flash latest firmware successful,but i've lost my imei,luckily i manage to recover it,thanks to your post anyway!

  9. Good day sir, ask ko lang anong version po ng Stock ROM ito? may update po kasi akong natanggap (VIA Wireless update) v3.2 po, hindi ko mainstall System was damaged daw po, tingin ko po dahil sa root, so ang balak ko eh mag unroot at ibalik ang recovery, so kung ito napo yung update na yun flaflash ko na lang lahat 😀 Thanks po!

  12. Hello and good day Sir Papajack, I would like to know how did you backup or get the whole Alcatel Flash 2 Stock ROM? Using this tutorial I have revert all the changes in my rooted device to its original state (untouched state) and I have successfully updated my device to 7049D_V3.2_151119 latest update as of 12/23/15. I would like to have a full backup of my device ROM before I root it again and make some changes.

  14. Sir. Balak ko po sanag iupgrade software ng phone ko.

    Dba pwede lang yun if naka stock recovery?

    Na balik ko na stock recovery.. Pero rooted padin phone ko. Is it okay na mag update ako? If yes.. Ma uunroot po ba to? Thank you po in advance.

  16. How to build CWM/TWRP/Philz recovery img without root for my Helio S1. Which configured with Mali-720, MT6753, 64 BIT, Android 5.1. That i want to root my device.
    Plzz help me sir.

  25. hi po pano pag ganito po yung error? actually napagana ko na sya pero after 5days nag bootloop ulit yung fone ko then inulit ko yung procedure kaso nag ka error na.

    "BROM ERROR" S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE(16704), MSP ERROR CODE :0X00."

  27. WALANG NANGYARI, GANUN PA DIN HARD BRICK.. NO COMMAND YUNG SA RECOVERY MODE.. SABI NG SERVICE CENTER PAPALITAN NA LNG DAW NG MAINBOARD.. PWEDE BANG MASIRA YUNG MAINBOARD DAHIL SA MALING PAG-ROOT?

  28. GANUN PA RIN, WALANG NANGYARI.. HARD BRICK PA RIN.. NO COMMAND YUNG SA RECOVERY MODE.. ANG SABI NUNG SA SERVICE CENTER PAPALITAN NA DAW NG MAINBOARD.. PWEDE BANG MASIRA YUNG MAINBOARD NG DAHIL SA NAG-FAIL NA PAG-ROOT?

  29. @Romer hindi basta masira ang main board iba ang software sa hardware. Maari software lang ang pwede masolusyunan sa tamang pag flash ng firmware or stockrom. Try mo factory reset sa stock recovery after mag flash kung hindi parin mag on.

  30. Tapos na Sir.. Na-wipe at restore factory settings na pero ganun pa rin.. Nasunod ko naman lahat ng steps sa taas, at successful naman pero ganun pa rin talaga.. Kau po ba ung sa radyo Sir?

  39. Good day sir! This is stock rom right? Why can't I flash this rom using TWRP? It says md5 not found. Do you have any idea how to flash this rom successfully? Btw when I put the scatter txt into the preloading it says

    'image lk checksum failed'
    'checksum reference value(0x96d5) in the config .ini file'
    'please refill correct checksum value and re-load scatter file again'

    Any help is appreciated, Thanks!

    • Hi arfem,
      Flashing in twrp will not work. As you can see this method is using SPFT using Desktop.
      There's a difference file between the file in TWRP and SPFT in short they are not compatible.

      • Hello sir thanks for the reply,

        I see flashing this rom using TWRP won't work, but I did try to flash it using SPFT, thus the error

        'image lk checksum failed'
        'checksum reference value(0x96d5) in the config .ini file'
        'please refill correct checksum value and re-load scatter file again'

        should I try downloading the zip file again? TIA

  48. Hello as per the post and its comments I flashed the ROM using the SPFT Flash Tool. I had a twrp recovery before that and I wanted to get rid of that. Though after flashing the ROM, I am back to LL v2.9 but my recovery is gone. TWRP is gone and also the stock recovery may not have got installed because broken android robot image is displayed while trying to access recovery mode (Like this: http://i.xomf.com/dwsgn.jpg). Please help.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.